Your Cart

Prong Snap Button with Laser Print

Prong snap button with laser print is made of brass material and does not contain phthalate and PVC in the top part. The product is resistant to corrosion. Prong snap button with laser print serves as opening and closing material which brings the two sides of the fabrics such as shirts, knitwear, Jean shirts, baby and children's products together.

Prong snap button with laser print consists of 4 pieces.

These are;

  • Prong snap button with laser print,
  • Socket,
  • Stud,
  • Prong Snap button.

Application;

In combination with special fastening molds;

  • In hand press,
  • In armed machine,
  • In motored and automatic machines.

Measure ;

The production is carried out in the dimensions specified by Ata Manufacturing in the reference table.

Logo;

Laser engraved logo and shape can be made in the desired pattern. (You can contact Ata manufacturing authorities by filling out the form on the contact page).

Feature;

Depending on the type of fabric to be applied, long or short legged prong snap button with laser design can be selected.
Or If you send a sample fabric to be pressed, we can run a test at our mock-up unit and decide the ideal length of the size of the prong snap button with laser print. We can also provide you with information on how to press by preparing a data sheet report. It is important that there is no pile difference in the fabric where the pressing is to be made. Metal back of the prong snap button with laser print can be produced in the desired colors located at veneer sheet. (the metal back cannot be painted)

For order and information supply, you can contact our customer representatives through the contact page and request samples before ordering.

Dimensions
7,5 MM
8,5 MM
9,5 MM
10,5 MM
11,5 MM
12,5 MM
15 MM
17 MM
21 MM