Your Cart

Prong Snap Button With Hollow Cap

Prong snap button with hollow cap serves as opening and closing material which brings the two sides of the fabric as such shirts, knitwear, Jean shirts, baby and children's products together

Prong snap button with hollow cap consists of 4 pieces.

These are;

  • Prong snap button with hollow cap,
  • Socket,
  • Stud,
  • Prong snap button.

Application;

With special fastening molds;

  • In hand press,
  • In arm machine,
  • In motored and automatic machines.


Measure ;

The production is made in the dimensions specified by Ata Buttons in the reference table of the prong snap button with hallow cap.

Logo;

The desired logo can be made with the prong snap button with hallow cap. (You can contact Ata Buttons authorities by filling out the form on the contact page).

Feature;

Depending on the type of fabric to be applied, long or short legged prong snap button with hallow cap can be selected.

    Or If you send a sample fabric to be pressed, we can run a test at our mock-up unit and decide the ideal leg length of the size of the prong snap button with hallow cap. We can also provide you with information on how to press by preparing a data sheet report. It is important that there is no pile difference in the fabric where the pressing is to be made. Prong snap button with hallow cap can be produced in the desired colors located at veneer sheet.

For order and information supply, you can contact our customer representatives through the contact page and request samples before ordering.

Dimensions
7,5 MM
8 MM
8,5 MM
9 MM
10 MM
11,5 MM
12,5 MM
16 MM
18 MM
22,0 MM